0.63 - 2.00 m/s Ø315 mm OVERSPEED GOVERNOR(OSG B)
KATEGORİLER
0.63 - 2.00 m/s Ø315 mm OVERSPEED GOVERNOR(OSG B)


PRODUCT FEATURES

  

• Nominal speed (min) 0.63 m/s

• Nominal speed (max) 2.00 m/s

• Fullfillment of lift directive EN 81:20 & EN 81:50 

• Engaging of safety gear in both directions 

• Accordingly to EN 81:20 and EN:81:50 firstly it cuts the switch and later the safety gear

• Mountable in machine room and shaft 

• Tensioner with safety contact

• Applicable for secondary installations and modernisations 

• Pre-set according to nominal speed and sealed

• Fixing holes are completely compatible with other overspeed governors

• Suitable for hydraulic and electrical lifts.

• Test groove ratio is 2/3

• Easy installation and maintenance


  UCM SYSTEM

• Short locking period

• 24 VDC / 3.60 amp ( brown cable / 8M square diode ) - 190VDC / 0.38 amp (brown cable) safety coil 

• Coil control switch

• It is delivered as assembled on overspeed governor. It is not compatible with another brand overspeed governor

• It can be used for revision


  GEARED SYSTEM COMPATIBLE WITH ENCODER

• It is compatible with Ø8 mm pin diameter rotary type encoder 

• Gear portion 1/3. (The rotation speed in the panel should be adjust 3 times lower) 


  REMOTE CONTROL SYSTEM FOR MACHINE ROOMLESS (MRL)

• Driving power, tractive force : 0,85 kg

• Tripping coil 220 V, 0.52 amp ( blue colour cable - 8M square diode ) , 354 ohm - 24 V, 8.05 amp ( yellow colour cable )

• Reset coil 220 V, 0.70 amp ( blue colour cable- 8M square diode ) , 180 ohm - 24 V, 3.20 amp ( yellow colour cable )

• Connectivity to cables with connector