0.30 - 1.60 m/s Ø235 mm OVERSPEED GOVERNOR (OSG A)
KATEGORİLER
0.30 - 1.60 m/s Ø235 mm OVERSPEED GOVERNOR (OSG A)


PRODUCT FEATURES

  

• Nominal speed (min) 0.30 m/s

• Nominal speed (max) 1.60 m/s

• Fullfillment of lift directive EN 81:20&EN 81:50  

• Engaging of the safety gear in both directions

• Accordingly to EN 81:20 and EN 81:50 firstly it cuts the switch and later the safety gear

• Mountable in machine room and shaft

• Tensioner with safety contact

• Applicable for secondary installations and modernisations

• Pre-set according to nominal speeds and it is sealed

• Fixing holes are completely compatible with other overspeed governors

• Suitable for hydraulic and electrical lifts

• Test groove ratio is  2/3 

• Easy installation and maintenance


 

  UCM SYSTEM

• Short locking period

• 24 VDC / 3.60 amp (brown cable / 8M square diode ) - 190VDC / 0.38 amp ( brown cable ) safety coil 

• Coil control switch

• It is delivered as assembled on overspeed governor.It is not compatible with another brand overspeed governors

• It can be used for revision



  GEARED SYSTEM COMPATIBLE WITH ENCODER

•It is compatible with Ø8 mm pin diameter rotary type encoder

• Geared portion is 1/3. ( Speed of the rotation on the panel must be managed lower than 3 times)


 


  REMOTE CONTROL SYSTEM FOR MACHINE ROOMLESS ( MRL )

• Driving power, tractive force : 0,85 kg

• Tripping coil 220 V, 0.52 amp ( blue colour cable - 8M square diode) , 354 ohm - 24 V, 8.05 amp ( yellow colour cable )

• Reset coil 220 V, 0.70 amp ( blue colour cable- 8M square diode ) , 180 ohm - 24 V, 3.20 amp ( yellow colour cable )

• Connectivity to cables with connector